
Zone 4WD Hire · Field guide 01
4WD & Off-Road Driving Guide for Western Australia
Understand your vehicle. Prepare for changing conditions. Make sound decisions on sand, gravel and remote roads before the adventure begins.
In this guide · 12 chapters
01 / Start prepared
4WD driving in Western Australia
A WA trip can move from sealed highways to loose gravel, corrugated roads and soft sand in a single day. Plan around the conditions you will actually encounter.
Distances between towns can be large. Fuel, drinking water, phone reception and recovery services may be limited. Weather can change the surface, access and travel time of a road that looked straightforward on a map. Allow time to stop, reassess or change plans.
Choose routes that suit your experience, the supplied vehicle and your rental agreement. A lifted vehicle, all-terrain tyres, a snorkel or a terrain mode does not make every track suitable. Arrange practical 4WD training before attempting technical terrain; the pickup handover explains your hire setup but is not a driving course.
Access comes first
Check both public access and your hire conditions
Suitable, legally open public roads and formed public tracks may be used under section 10 of our terms, subject to specific restrictions and your agreed booking conditions. Being unsealed or remote does not, by itself, mean a formed public road needs separate written approval.
Dunes, unformed tracks, private or station tracks, island travel and routes with limited recovery access have additional approval requirements. Section 12 also identifies particular restricted or prohibited routes. A park pass, online map or another driver’s advice does not override those requirements.
For international visitors
Drive on the left and take extra care after rest stops, at intersections and when turning onto an empty road. Speed signs use kilometres per hour. Wear seatbelts, use suitable child restraints and stop safely before checking navigation. Ask for another demonstration if a control or instruction is unfamiliar.
Read more: WA Road Safety Commission · Hire terms, sections 10–14 · WA destination guides
02 / Know the controls
Understanding your 4WD
Learn the controls while the vehicle is stationary at pickup. Identify the transmission selector, 4WD selector, dashboard indicators, differential-lock controls and any terrain or hill-descent functions fitted to your vehicle. Confirm which controls are relevant to the route you plan to drive.
2H, 4H and 4L: what the labels mean
2H
Two-wheel drive · high range
On a typical part-time system, engine power goes to the rear axle. It is the normal road mode where the manufacturer specifies it.
4H
Four-wheel drive · high range
Engages drive to both axles for suitable loose surfaces. Mechanically locked part-time 4H is not a dry sealed-road setting.
4L
Four-wheel drive · low range
Adds reduction gearing for controlled low-speed work. It increases torque multiplication; it is not a higher-speed driving mode.
Conceptual diagram of a typical part-time layout. Orange identifies the driven axle or axles. It does not show how individual differentials distribute torque, and it is not a control guide for your rental vehicle.
Full-time and automatic systems are different
Some 4WDs use full-time four-wheel drive or an automatic setting such as 4A. These may allow normal road use in the appropriate unlocked or automatic mode. A full-time vehicle may not have a 2H setting. Its centre differential or transfer system also differs from a part-time system. Follow the manual for the exact model, year and variant.
Before changing range: follow the manufacturer’s requirements for vehicle speed, transmission position and engagement. Requirements vary. Confirm the selected mode on the dashboard; stop and seek advice if an indicator keeps flashing or the shift does not complete. Do not force a selector or improvise a procedure.
Differential locks and traction control
A centre differential lock and an axle differential lock do different jobs. An axle lock limits the difference in rotation between wheels on that axle; it can help in particular low-traction situations but can affect steering and vehicle behaviour. Use it only under the conditions and limits specified for the vehicle.
Traction control helps manage wheel slip. Terrain modes may change throttle response, gear selection or traction-control behaviour. There is no universal instruction to turn traction control off for sand. Learn the intended setting for the supplied vehicle and confirm what a selected mode changes.
Hill descent control
Where fitted, hill descent control can use the braking system to help manage downhill speed. It has operating conditions and limits. It does not assess whether a slope is suitable, choose your wheel placement or guarantee grip. The driver remains responsible for steering, speed and deciding whether to proceed.
Sources: Ford 4WD guidance · Australian manufacturer manuals · Isuzu Terrain Command · Ford hill descent guidance
03 / Sand driving
Sand driving: prepare before the surface softens
Soft sand can quickly increase resistance, reduce steering response and strand a vehicle. Stop at a safe, firm preparation area before entering a permitted sandy track. A route that is suitable in one season may be unsuitable after wind, rain, erosion or heavy use.
Before entering sand
- Confirm legal access, any required written route approval and an exit route. Dune access has separate approval requirements.
- Check local park or land-manager advice, weather, tide predictions where relevant and conditions on the day.
- Use the appropriate 4WD range and terrain settings explained for your vehicle. Do not assume another model’s setup applies.
- Confirm the instructed tyre pressures for the fitted tyres, load and conditions. Have a suitable gauge and working inflation equipment.
- Secure luggage and accessories. Close and stow the rooftop tent and awning before moving.
Controlled momentum
Use smooth steering and throttle inputs, keep a safe distance and maintain a pace that leaves room to stop for people, other vehicles and changes in the surface. Momentum means avoiding unnecessary interruptions to progress; it does not mean high speed. Select a suitable gear and range before a difficult section, according to your vehicle instructions.
Avoid abrupt turns and unnecessary hard braking. Watch for deep ruts, soft shoulders and hidden obstacles. If the vehicle starts losing progress or the wheels spin, ease off and stop safely before repeated attempts dig it deeper. Assess the situation and contact Zone if you cannot continue safely.
Beach access: three things to distinguish
Tides and permitted beach driving
Check the tide prediction for the relevant location and local warnings. A predicted low tide is not permission to use the wet beach. Our terms prohibit driving below the high-water mark, in ocean wash or through tidal water. Do not proceed if erosion, tide reach or soft sand leaves no safe permitted route.
After permitted beach or sand use, follow Zone’s cleaning instructions and remove sand or salt exposure where safe, lawful and practical. Reinflate tyres to the instructed road pressures before returning to normal sealed-road travel.
Sources: DBCA four-wheel driving guidance · Isuzu terrain guidance · Bureau of Meteorology tides · Hire terms, section 13
04 / Gravel & corrugations
Gravel and corrugated roads
Loose gravel reduces grip and can move beneath the tyres. Corrugations are repeated ridges across the surface that can unsettle the vehicle, affect braking and shake luggage or accessories loose.
Adjust before the road changes
Reduce speed before a bend, crest, washout or transition from sealed road to gravel. Keep steering, braking and acceleration progressive. Avoid sharp corrections at a soft edge. Use the road mode appropriate to your particular 4WD; high-range four-wheel drive is not a substitute for slower speed or adequate stopping distance.
Dust and visibility
Increase the gap behind other vehicles. Dust can hide a stopped vehicle, an approaching road train, animals or a change in the track. Do not overtake when the road ahead is obscured. Use appropriate lights and slow down enough to maintain a safe view of the road; find a safe place to stop if visibility becomes inadequate. Avoid stopping in a live traffic lane or on a blind bend.
Corrugations and loaded vehicles
Use a speed that preserves control rather than trying to skim over corrugations. Take breaks to inspect tyres, visible leaks and loose fittings. Secure heavy items low in the load area and stay within the vehicle and accessory load limits explained at pickup. Tyre adjustments must follow the instructions for your tyres and load, rather than a fixed percentage taken from another vehicle.
Zone hire limits · section 14
A maximum is not a target
Our current terms set maximums of 110 km/h on sealed roads, 80 km/h on gravel, dirt, corrugated or unsealed roads, and 50 km/h for permitted off-road, beach, sand and 4WD-track driving. Kalumburu Road has a 60 km/h maximum and separate route requirements. The lowest applicable posted limit, hire limit or safe speed for the conditions applies. Reduced tyre pressures, visibility or difficult terrain may require a much lower speed.
Sources: Road Safety Commission regional driving advice · Guide to driving on WA roads · Hire terms, section 14
05 / Hills & rocks
Hills and rocky terrain
Ground clearance is the space beneath the vehicle. It does not guarantee that a rock, rut or crest will clear the lowest component. Wheelbase, approach and departure angles, load and accessory position also affect what the vehicle can negotiate.
Assess a permitted track
- Stop in a safe position and assess the visible route ahead. Look for loose rocks, steps, deep ruts, erosion, unstable edges and a safe exit.
- Choose wheel placement that avoids underbody contact and keeps the vehicle stable. A spotter must stand clear of the vehicle’s path and potential slide or rollover area.
- Use a suitable low-speed gear and, where appropriate for your vehicle and the conditions, low range. Confirm the setting before the slope.
- Keep movements controlled. A rooftop tent or loaded roof rack affects the vehicle’s centre of gravity; respect the load limits.
Ascending and descending
Plan the approach, crest and descent as one route. Keep to a stable line and use the gear and descent controls demonstrated for your vehicle. Avoid selecting neutral or relying on free rolling downhill. Do not make a turn across a steep slope to escape a difficult section.
Hill descent control, traction control and differential locks cannot make unstable ground safe. If a climb stalls, the tyres slip, an exit is unclear or you do not know the appropriate response, secure the vehicle safely and seek help. Failed-climb recovery needs practical training and vehicle-specific instructions.
Choose another route when the track is beyond your experience, the vehicle’s clearance, the conditions or the permission in your rental agreement. Technical rock crawling and steep dune driving are not implied by hiring a 4WD.
Sources: Isuzu terrain guidance · Ford 4WD precautions · Hill descent limitations
06 / Water crossings
Water crossings: stop and reassess
Water can conceal a washed-out road, soft base, deep holes or debris. Depth can change across a crossing, and moving water can destabilise a vehicle. Floodwater, saltwater and tidal crossings are prohibited under our terms.
Freshwater permission has limits
Clause 13.9 sets a maximum depth of 0.5 metres for an authorised freshwater crossing, together with route, access, safety and vehicle-suitability conditions. This is a contractual ceiling, not a recommendation or a guarantee of safe passage. A lower manufacturer limit or unsafe conditions take priority. A crossing below that depth is not automatically authorised.
Water-damage exclusions continue to apply to an otherwise authorised crossing. Yardie Creek crossing is expressly prohibited. Read sections 9, 11–13 and your agreed route conditions before travelling.
Before any decision
Check closures and warnings. Do not bypass a barrier, follow another vehicle as proof of safety or enter water to test a route. A snorkel does not waterproof the vehicle’s electronics, transmission, axles or cabin, and an advertised wading depth does not grant rental permission.
This guide does not provide a water-crossing procedure. Stop at a safe location and contact Zone before considering a crossing whose approval, conditions or suitability are unclear. If water is rising or there is immediate danger, prioritise people, call emergency services and follow their directions.
Sources: DFES flood safety · Main Roads Travel Map · Hire terms, clause 13.9
07 / Tyre pressures
Tyre pressures for your vehicle
There is no universal sand, gravel or road PSI figure for our fleet. The correct pressure depends on the fitted tyres, vehicle, load, surface, speed and conditions.
The tyre placard and owner’s manual provide the manufacturer’s road-pressure information, usually for specified loading and cold tyres. The rental vehicle may have a different tyre size, construction or touring load from another example of the same model. Confirm the applicable pressures and any adjustment limits with Zone at handover.
Why pressure matters
Pressure influences how a tyre supports the load and interacts with the surface. Deflation may help in appropriate sand conditions, but excessive deflation can reduce stability, increase tyre heat or allow a tyre to unseat from the rim. A tyre that looks inflated can still be unsafe for its load and speed. Use a reliable gauge rather than judging by appearance.
Your pressure decision process
- Confirm the setup. Identify the vehicle, fitted tyres and loaded condition. Find the placard and ask which instructions apply.
- Confirm the conditions. Discuss the permitted surface, expected speed and any adjustment with Zone. Record the vehicle-specific instructions.
- Measure and monitor. Use the supplied or suitable gauge. Follow the demonstrated process and inspect for damage or warning messages.
- Restore for road travel. Reinflate to the instructed road pressures before returning to normal sealed-road driving. Recheck as instructed.
Inflating and deflating
Stop on safe, firm ground away from traffic. Confirm that you can reinflate before reducing pressure. Use equipment you have been shown how to operate, keep valve components clean and follow the compressor’s operating limits. Replace valve caps and check the reading after adjustment.
Do not bleed a warm road tyre down to a cold-pressure figure simply because its reading has risen after driving. Follow the manual and Zone’s instructions for when and how to check. A tyre-pressure warning after an adjustment needs assessment; do not dismiss it or reset a monitoring system without the correct instructions.
If you cannot confirm a suitable pressure or cannot reinflate, pause the off-road plan and contact Zone. Use a safer permitted route rather than copying another driver’s PSI.
Sources: Manufacturer manuals for the actual vehicle · Isuzu tyre-pressure guidance · Michelin warm-tyre precautions · Handover and daily checks
08 / Remote travel
Remote travel in Western Australia
Plan each leg around road conditions, realistic travel time and confirmed services. Allow for a closure, detour or breakdown. Download maps and essential instructions before coverage ends, and carry a suitable backup map.
Fuel, water and supplies
Identify fuel stops and confirm opening arrangements. Consumption can increase in soft sand, with load or in difficult conditions. Discuss a suitable reserve with Zone.
Carry enough drinking water for every person and for an unexpected delay, plus food, shade, suitable clothing and required medicines. The amount must suit the route, season, group and possible delay. Do not rely on an unverified tank, creek or campground tap as drinking water.
Communications and check-ins
Mobile reception is not continuous across WA. Confirm a suitable satellite phone or emergency beacon arrangement for the route and learn how to use it.
A UHF radio, personal locator beacon and satellite phone have different functions. Set an itinerary and overdue-response plan with a trusted contact. Tell that person when you change plans or reach your destination.
Weather, heat and closures
Check Bureau of Meteorology forecasts and warnings, Emergency WA, DBCA park alerts and the relevant local road authority. Main Roads’ map primarily covers its road network, so a local or station road needs its own condition check. Wet-season flooding, bushfires, heat and damaged roads can make a route unavailable at short notice.
Travel with time to take breaks and reach camp in daylight. Avoid leaving route choices until you are tired or low on fuel. Keep drinking water accessible and plan shade and cooling options. Reassess the itinerary when weather or road warnings change.
Wildlife, livestock and other road users
Look ahead and along the road edges for animals. Reduce speed and allow room to brake; avoid a sudden swerve that could cause loss of control. Wildlife activity and poor visibility can make dawn, dusk and night travel particularly demanding. Keep a generous distance from road trains and only overtake when visibility and the available road make it safe.

Sources: DBCA remote-travel advice · Main Roads Travel Map · DFES and Emergency WA · Bureau of Meteorology
09 / Emergencies
Emergencies and vehicle assistance
Urgent police, fire or ambulance help
Call 000Give the service required, your location or coordinates, the road or track name, nearby landmarks, the number of people and the nature of the danger. Follow the operator’s instructions.
Calling 000 or 112 on a mobile still requires coverage from an available mobile network. Neither number creates reception where no mobile network is available. In a life-threatening situation without usable phone service, activate your suitable distress beacon according to its instructions.
After an accident
- Stop and assess immediate danger. Move people to a safe place where possible without exposing them to traffic, unstable ground or another hazard.
- Call 000 for urgent help. Provide first aid only within your training and follow emergency-service instructions.
- When safe, notify Zone. Record the location, time, other parties and witness details, and take photographs where doing so is safe.
- Follow legal reporting duties. Do not agree liability or arrange non-emergency repairs, towing or recovery without Zone’s approval.
Breakdown or warning light
Stop safely if the vehicle becomes unsafe, develops a mechanical concern or displays a warning that requires stopping. Note the warning message and location and contact Zone as soon as practicable. Continuing to drive can worsen damage. In a remote location, stay with the vehicle unless an immediate danger makes that unsafe; it is generally easier for rescuers to locate than a person on foot.
Puncture or damaged tyre
Reduce speed safely and stop on firm, level ground away from traffic. Do not continue on a flat or visibly unsafe tyre. Contact Zone. Use the spare and changing equipment only if the location is safe, you are competent to do so and you can follow the exact manual and handover instructions. Never get under a vehicle supported only by a jack. If the ground, traffic or equipment makes changing unsafe, arrange approved assistance.
Obtain approval before tyre replacement unless immediate action is necessary for safety; retain evidence and receipts and notify Zone as soon as practicable. Tyre and puncture benefits depend on the selected liability option and its terms.
Overheating
Respond to a temperature warning according to the manual and stop safely. Do not continue driving with an overheating or unsafe vehicle. Keep clear of steam and hot components. Never remove a coolant or radiator cap while the system is hot. Contact Zone for instructions; cooling down does not, by itself, confirm that the cause is resolved.
Bogging
Stop repeated wheelspin. Assess ground stability, tide or weather exposure and the safety of everyone nearby. Contact Zone before arranging non-emergency recovery. Use a shovel or traction boards only if supplied or suitable, you have been instructed in their use and it is safe to position them. Keep people clear of wheels and vehicle movement.
Snatch straps, winches and towing introduce serious hazards. Do not attach a recovery strap to a tow ball, tie-down point or an unverified attachment. Rated equipment and proper recovery points still require training and a safe procedure. Ask for approved assistance rather than attempting an unfamiliar recovery.
Contact Zone for vehicle assistance
During working hours:
+61 8 6256 4519
After hours:
info@zone4wdhire.com.au
Use any additional assistance contact supplied with your hire.
Location, safe access and service availability affect assistance timing. Zone staff do not travel out to repair vehicles during a hire; contact us to arrange appropriate third-party assistance. The terms distinguish inherent mechanical faults from hirer-caused events. Read section 21 for approval requirements and applicable costs. Do not delay essential emergency action to protect people or prevent further damage.
Sources: ACMA emergency-call information · AMSA distress beacons · DBCA remote breakdown advice · ACCC recovery safety · Ford jack and hot-coolant precautions · Hire terms, sections 18–21
10 / Before departure
Your pre-departure checklist
Use this at pickup and before each touring day. Stop and resolve any safety concern before continuing.
People and plans
- Every driver is approved and understands the vehicle controls.
- The route is permitted; required approvals and permits are recorded.
- Weather, road, park and tide information has been checked.
- Travel time, fuel stops, drinking water, rest breaks and alternatives are planned.
- A trusted contact has the itinerary and check-in plan.
- Maps, communications equipment, first-aid supplies and medicines are ready.
Vehicle and equipment
- Pickup condition and any existing damage have been recorded.
- Tyres, spare and instructed pressures have been checked.
- The gauge, compressor and supplied tools are located and understood.
- Warning lights, visible leaks and loose fittings have been checked.
- Luggage is secured and load limits are respected.
- Tent, awning, doors, drawers and accessories are closed and secured for driving.
- Fuel type, assistance contacts and the owner’s manual are understood.
Before returning to sealed roads: restore the instructed road tyre pressures, return the vehicle to its appropriate road-driving mode, check for damage or loose equipment and clean permitted sand or salt exposure as instructed.
Make the handover information usable
Before leaving Perth, record the vehicle registration and build, its normal road mode, the confirmed tyre pressures for your load, loaded height, equipment controls and assistance numbers. Keep the record with your offline maps and vehicle manual.
Open the five-part pickup record →Related information: Vehicle handover and daily checks · Optional camping and communication equipment
11 / Your rental vehicle
Your vehicle & equipment guide
Open the guide for your booked vehicle to prepare for the pickup walkthrough, identify its controls and build your camp pack-down routine. Use it with the manual and instructions for the actual vehicle supplied.
Toyota Prado
Full-time 4WD principles · Rear drawers · 44L fridge.
Read the Prado guide →Ford Everest Platinum
2025 Platinum · 4A explained · 60L fridge.
Read the Everest guide →Ford Ranger
Canopy touring · Power & water · 80L upright fridge.
Read the Ranger guide →Isuzu D-MAX
2H / 4H / 4L · Portable compressor · Bring your camp setup.
Read the D-MAX guide →12 / Common questions
4WD driving FAQs
Can I use any track that is shown on a map?
No. Check legal access, suitability, current closures and your rental terms. Open, suitable formed public roads and tracks are treated differently from dunes, unformed tracks, private or station tracks and specifically restricted routes. A map does not grant access or hire permission.
Does every 4WD have a 2H setting?
No. Full-time and automatic 4WD systems can have different controls and road-driving modes. Learn the layout of your actual rental vehicle at pickup and use its owner’s manual. The part-time 2H, 4H and 4L explanation in this guide does not apply to every vehicle.
Can I leave a part-time 4WD in 4H on a sealed road?
Mechanically locked part-time 4H and 4L are not normal dry sealed-road modes. Full-time or automatic systems may allow road use in an appropriate setting. Return to the correct road mode for your particular vehicle as instructed; contact Zone if unsure.
What tyre pressure should I use for sand?
Use the instructions confirmed for the vehicle’s fitted tyres, load, conditions and intended speed. This universal guide intentionally provides no generic PSI figures. Confirm the pressure and reinflation plan at pickup or contact Zone before reducing pressure.
Should I switch traction control off in soft sand?
There is no universal rule. The appropriate setting depends on the vehicle and its terrain-control system. Some modes change traction-control behaviour automatically. Follow the manual and the vehicle-specific handover rather than applying another driver’s procedure.
Can I drive on the firm wet sand at low tide?
Our terms prohibit driving below the high-water mark or in tidal water and ocean wash. Low tide does not override those restrictions. If no safe, lawful and suitable route is available above that boundary, do not proceed.
Does a snorkel make a water crossing safe?
No. A snorkel does not waterproof the whole vehicle or assess depth, current or the road beneath the water. Rental restrictions and water-damage exclusions still apply. Floodwater and tidal crossings are prohibited; contact Zone if a freshwater crossing’s permission or suitability is unclear.
Where should I check road closures?
Use Main Roads’ Travel Map for its network, DBCA park alerts for parks, Emergency WA for hazards and the relevant local authority or land manager for other roads. Check before departure and during the trip; an old screenshot or navigation app may not show a new closure.
Will 112 work where there is no mobile reception?
000 and 112 may use an available mobile network, but neither creates coverage where no mobile network is available. Plan suitable remote communications and an emergency beacon before leaving coverage. Use a distress beacon according to its instructions in a life-threatening situation.
What should I do if the vehicle is bogged or breaks down?
Stop safely, assess any immediate threat, avoid repeated wheelspin or further damage and contact Zone. Stay with the vehicle in a remote location unless immediate danger makes that unsafe. Seek approval before non-emergency repairs, towing or recovery. Call emergency services for an urgent threat to people.
Does Ultimate cover all off-road damage and recovery?
No. Benefits apply only within their scope and the terms. Beach-related underbody damage, water and saltwater damage, and specified recovery events have exclusions. Permission to use a route is separate from liability protection. Read the liability page and your agreement before departure.
Can I rely on this guide offline or through a vehicle QR code?
You can save or print the guide before leaving reception. Keep the vehicle’s manual, handover instructions, pressure record and assistance contacts with you. A saved guide cannot show live closures or weather warnings. Use the published Guides & Safety Centre to find your vehicle page before saving it. Recheck live conditions before departure.
Sources / Check the latest information
Official references
The guide brings together general principles from the sources below and the current Zone rental terms. Official information and conditions can change. Manufacturer material explains principles; select the manual matching your exact vehicle before applying an operating procedure.
- WA Road Safety Commission — Visitors to regional WA
Trip planning, loose surfaces, wildlife and driving on the left. - WA Road Safety Commission — Guide to driving on WA roads
Regional driving, dust, fatigue and sharing the road. - DBCA — Four-wheel driving · D’Entrecasteaux visitor guide
Park access, responsible track use and changing terrain. - Main Roads WA — Travel Map
State-road closures and incidents; also check the relevant local road authority. - DBCA — Travelling in remote locations · Park safety
Preparation, communications and staying with a stranded vehicle. - Bureau of Meteorology — Tide predictions
Location-specific predictions; these do not establish vehicle access or safe beach conditions. - Bureau of Meteorology — Weather forecasts and warnings
Check the destination and route before and during travel. - DFES — Bushfire information · Emergency WA
Current warnings, incidents and preparation. - DFES — During a flood
Floodwater and damaged-road risks. - ACMA — Emergency calls
000, mobile network coverage and giving your location. - AMSA — Distress beacons
Personal locator beacons and emergency activation. - ACCC Product Safety — Motor vehicle recovery straps
Recovery hazards, appropriate equipment and training. - Toyota Australia manuals · Ford Australia manuals · Isuzu UTE Australia manuals
Use the manual for the actual supplied model and year. - Ford Australia/NZ Everest handbookGeneral 4WD principles, pp. 184–189. Reference example; use the manual matching your supplied vehicle for operating procedures.
- Ford Australia/NZ Everest handbookHill descent assistance and limitations, p. 214. Reference example; use the manual matching your supplied vehicle for operating procedures.
- Isuzu UTE Australia — Terrain Command and differential locks
Vehicle-system concepts and appropriate use. - Isuzu UTE Australia — Tackling different terrains · Loose surfaces
Terrain assessment and controlled driving. Example pressures in other material are not instructions for a Zone vehicle. - Isuzu UTE Australia — Tyre-pressure guidance
Use alongside the manual, fitted-tyre information and Zone handover. - Ford Australia/NZ Everest handbookHot-coolant and vehicle-jack precautions, pp. 363 and 404. Reference example; use the manual matching your supplied vehicle for operating procedures.
- Michelin Australia — Car tyre FAQs
Pressure checks and warm-tyre precautions; use the vehicle placard and confirmed instructions for the fitted tyres.
Photo and illustration credits
Hero: Lancelin Sanddunes by Zachary Coubrough, CC BY-SA 4.0. Displayed at responsive sizes and cropped for layout; image adaptations remain under the same licence.
Coastal photo: Francois Peron National Park by Michael Lammli, reused from our media library under the Unsplash licence. Diagrams are original Zone 4WD Hire educational illustrations and are not vehicle-specific operating diagrams.
Before you proceed
Ask us about your vehicle or route.
Stop somewhere safe if an instruction, warning or condition is unclear. Our team can clarify your hire conditions and the setup supplied with your vehicle.
During working hours: +61 8 6256 4519
After hours: info@zone4wdhire.com.au
Damage liability and bond information
Zone 4WD Hire · General educational guide · Updated 14 October 2026. Check current official conditions and your vehicle instructions before travel.
