Your vehicle / Your equipment
Isuzu D-MAX4WD & equipment guide
Understand Terrain Command, organise your own travel equipment and practise using the portable compressor before leaving Perth in the D-MAX.

On this page
Use this with your pickup handover. Confirm the supplied vehicle’s build, fitted controls, load limits and equipment. Follow its owner’s manual and hire terms. Read while parked safely; the collection walkthrough does not replace practical 4WD training.
01 / Know your vehicle
Understand the 4WD controls
The D-MAX uses Isuzu’s Terrain Command approach to selectable 4WD. Identify the actual transmission and selector at collection, then use the manual matching that vehicle.
2H
Two-wheel drive in high range is the normal road setting on this part-time system.
4H
High-range four-wheel drive engages both axles. Return to 2H for ordinary dry sealed-road travel.
4L
Low range adds reduction gearing. Isuzu distinguishes this stationary range change from a permitted high-range change on the move.
Low range: learn the whole procedure
Isuzu describes stopping and selecting neutral for an automatic before engaging 4L, with dashboard confirmation afterwards; a manual transmission requires its own clutch procedure. Practise the complete procedure and its reverse at handover using the exact vehicle manual. Do not copy a shift speed from a different model.
Rear differential locks, Rough Terrain Mode and driver-assistance features vary by year and specification. Confirm which are fitted; do not turn off assistance systems simply because another vehicle’s video says to.
Sources: Isuzu owner’s manuals and Isuzu’s Terrain Command explanation. General pressure examples in external articles are not tyre-pressure instructions for this hire vehicle.
02 / Do this at collection
A practical pickup walkthrough
Work through these actions with Zone staff. Ask for another demonstration until you can identify the controls and secure the equipment yourself.
- Identify 2H, 4H and 4L, the confirmed-mode indicator and the normal road setting.
- With staff, practise the low-range sequence for the actual transmission and the return to road settings.
- Unpack the portable compressor. Identify its approved power connection, hose, gauge and operating/cooling limits.
- Locate the spare-wheel access, jack, tools and rated recovery points. Confirm the approved assistance process.
- Load or discuss your own camping equipment, restraints, weather protection and drinking-water arrangements before departure.
03 / The fitted setup
Use the equipment with a routine
These details come from the Isuzu D-MAX hire listing. The handover confirms the exact equipment and instructions for your booking.
Your own camping arrangement
The D-MAX listing has no rooftop tent. Plan sleeping equipment, food storage, cooking gear and shelter separately. Check optional extras before booking rather than assuming that the Prado, Ranger or Everest camping package is included.
Portable ARB compressor
The D-MAX’s compressor is listed as portable. Have staff show you its connection and safe placement before you need it. Keep the hose clear of traffic and hot or moving components. Use a reliable gauge and follow the compressor’s duty and cooling limits.
Load security & access
Secure luggage to the intended load points, keeping heavy items low and within the supplied vehicle’s load limits. Protect your equipment from weather and dust as needed. Keep the first-aid kit, drinking water, compressor and communications equipment accessible.
Recovery & communications
The listed equipment includes MaxTrax, rated recovery points, GME UHF, a jump starter and tyre deflator. Ask where each is stored and how it is used. A UHF radio is not a substitute for a remote emergency communications plan.
Check your camping plan before loading
List where each person will sleep, how food will be kept safe, what drinking water you will carry and how gear will be secured. Confirm the actual luggage space and any extras with Zone. Avoid arriving at a remote camp expecting a tent or fridge that is not included.
04 / Prepare before the surface changes
Tyres, terrain & the return to road
Before permitted sand or rough tracks
Check access, current conditions and the restrictions in your agreement. Confirm the appropriate settings and pressure instructions for your tyres and load. Locate a safe preparation area and make sure you can reinflate.
If wheelspin starts digging the vehicle in, stop repeated attempts and reassess. Recovery points and boards do not make an unfamiliar recovery safe.
Sand driving preparationBefore normal sealed-road travel
Reinflate to the instructed road pressures and restore the correct road-driving mode. Check tyres for damage, re-secure loose equipment and resolve warnings before continuing.
A warm tyre reading is not directly comparable with a cold-pressure figure. Follow the supplied pressure-check instructions.
Tyre pressure decision guideNo generic PSI figure applies to every hire. Record the pressures and adjustment limits for the actual vehicle at collection. The fitted tyre, load, speed and surface all matter.
Suitable, legally open public roads and formed public tracks do not need separate approval merely because they are unsealed or remote. Specific route restrictions and your agreed booking conditions still apply. See hire terms, sections 10–14.
05 / Before moving
Your pack-down & departure check
- 2H or the appropriate setting for the next permitted surface is confirmed.
- Luggage, load restraints and exterior closures are secure.
- The portable compressor, hose, gauge and valve caps are packed.
- Sleeping gear, food storage, drinking water and communications are accounted for.
- Tyres, spare access, fuel and the day’s weather and route are checked.
Your handover record — save these details before departure
- Vehicle & manual
- Registration, model/build, transmission and the matching owner’s manual.
- Tyre instructions
- Fitted tyre size; front/rear cold road pressures for your load; any approved surface adjustment and speed limits; reinflation plan.
- Driving settings
- Normal road mode; range-change steps; what confirms engagement; how to restore normal settings.
- Equipment & clearance
- Loaded height, load limits, fuel type, power controls, equipment limits and travel-latch locations.
- Route & help
- Required approvals, agreed itinerary, check-in arrangements and the assistance contacts supplied with your hire.
Save this page and your completed handover notes before leaving reception. Keep a paper or offline copy; this website does not store your vehicle details.
06 / Common questions
D-MAX questions
Can I leave 4H engaged on the highway?
On the part-time setup described here, ordinary dry sealed-road travel uses 2H. Follow the supplied manual and return to the correct road setting before that surface. Contact Zone if the mode will not disengage or the indicator remains unresolved.
Is a fridge or rooftop tent included?
The current D-MAX listing has no rooftop tent and does not list the fitted camping/fridge package used on the other vehicles. Confirm any optional extras on your booking and plan your own camp setup accordingly.
Can I adjust tyres if I have not used the compressor?
First confirm the instructed pressures and practise the inflation setup with staff. If you cannot reinflate or verify a suitable pressure, change the plan and contact Zone before entering a surface that needs adjustment.
If something is unclear
Stop safely. Get the right help.
Vehicle or equipment problem
Stop using unsafe equipment and contact Zone. Note the location, warning message and what happened. Seek approval before non-emergency repairs or recovery.
During working hours:
+61 8 6256 4519
After hours:
info@zone4wdhire.com.au
Use any additional assistance contact supplied with your hire. Location and service availability affect response arrangements.
Immediate danger
Call 000 for an urgent threat to life or safety. Mobile emergency calls still need an available network; plan suitable remote communications before leaving coverage.
Emergency & recovery adviceEmergency information: ACMA. Prepared by Zone 4WD Hire · Updated 14 October 2026. Equipment reflects the current hire listing; confirm your booked setup at collection.
